Bumpers & Brush Guards

Call Us: (269) 443-2012

Bullnose front bumpers bring all the attention and authority to front and center enforcing the significant strength of Ranch Hand bumpers. Designed for the off-road enthusiast who wants the protection of a front bumper replacement without the wrap around grille guard, the body of the steel bumper paired with the bullnose pipe make for a solid center point of defense.


The protective counterpart to front bumpers and grille guards, Ranch Hand back bumpers offer a substantial replacement for your fragile factory bumper. All of Ranch Hand's rear bumpers are designed to guarantee towing confidence and are available in different series which are engineered to meet differing needs and expectations. Whether you need to tow a trailer or want to display the strength and style of smooth steel, Ranch Hand back bumpers are the strongest and most dependable back bumper option in our industry.


The Ranch Hand Legend Grille Guard is the original icon of the vehicle protection industry. Providing outstanding protection, the Legend Grille Guard is one fully welded piece of steel that is mounted to your truck or SUV’s frame in four locations providing maximum strength and eliminating vibration. Ranch Hand’s grille inserts are punched specifically to match your OEM truck/SUV grille pattern. Built for various trucks and several SUVs, a vehicle should not be on the road without this valuable yet affordable protector leading the way.

A white truck with the word ranch hand on the side is parked on a dirt road.
A silver ford truck with ranch hand written on the tailgate
A ranch hand truck is parked in a dirt field

Protect your front end with Luverne’s SolidShield Van Grille Guard.


Luverne’s SolidShield Van Grille Guard adds the strength and dependability where it matters the most. The SolidShield uses a four-point frame mounting system, a step above the typical two-point mounting system, to make a significant difference in strength, durability and rigidity. SolidShield is made for cargo van fleets and solo adventurers alike, combining state-of-the-art technology with a stylish look to deliver quality protection and sophistication all in one.



Visit us and protect the front end of your van with Luverne’s SolidShield Van Grille Guard.

A white van is parked on the side of a dirt road.
A white van with luverne written on the bottom
A white van is parked on a dirt road.

Lightweight, slim one-piece modern design*


  • Increases ground clearance and angle of approach
  • Constructed of 10 gauge steel for strength and style
  • Accommodate for OEM hitch and LED back up lights
  • Configured to accept (2) FM6 LED flush mount lights - sold separately
  • Custom laser-cut Westin logo
  • Hardware and mounting brackets included
  • E-coated base coat provides long lasting corrosion protection
  • Bolt-on installation - no drilling required
  • Available in textured black finish


* 2020 Toyota Tundra models are designed with a unique modular 3-piece design instead of the one-piece design standard for all other makes.

A white ford super duty truck with a black bumper is parked on the side of the road.

Westin Pro Series

  • Constructed of 11 gauge steel for strength and style
  • Heavy duty diamond plate steel
  • Unique “corner step” design provides an extra wide access step area
  • Welded inner structure for maximum strength
  • Protects vehicle from damage against wildlife and road debris
  • Provides added safety to driver and vehicle
  • Compatible for blind spot monitors and parking sensors
  • Accommodate for OEM hitch
  • Custom die-cast riveted logo badge
  • Hardware, mounting brackets and two LED back up lights included
  • Flush mount LED license plate lights included
  • Bolt-on installation - no drilling required
A white ford truck is parked on the side of the road

Westin HDX Bandit Rear Bumper

  • Protects vehicle from damage against wildlife and road debris
  • Provides added safety to driver and vehicle
  • Heavy duty diamond plate steel
  • Constructed of schedule 40 steel pipe
  • Honeycomb mesh protects grille
  • Heavy duty 2 3/4" wide upright rubber strips
  • 1 1/2" headlight protection tubes
  • 2" tube full wraparound wings ties into bumper
  • Metal mesh screen allows maximum air flow to intercooler or radiator area
  • Removable mesh screen for adaptive cruise control (late model Ford only)
  • Removable center mesh for factory camera option (late model Ford only)
  • Has provisions for factory parking sensors (late model Chevrolet and Ram)
  • Built-in 2" receiver hitch
  • (2) heavy duty 9,500 lbs bow shackle mounts
  • 15/16" diameter shackle mount hole
  • Compatible for factory fog lamps or LED post mount lights
  • Custom die-cast riveted logo badge
  • Mounting provisions for license plate
  • Hardware and mounting brackets included
  • Bolt-on installation - no drilling required
A white truck with a black bumper is parked on the side of the road.

Westin HDX Bandit Front Bumper

  • Accommodates factory 360° camera. Minor interference with Pre-runner Guard
  • Optional relocation bracket available for Adaptive Cruise Control. Relocation bracket is required for adaptive cruise control for 2017-2019 Super Duty (M3850-1). All 2020-2021 models will need ACC bracket (M3851-1). Chrome grilles will not work with relocation bracket.
  • Side mounting slots and tabs will hold up to (2) 3″ X 3″ cube lights per side (lights not included). Tested with Rigid Industries 3×3 D-series HD cubes
  • Allows for an integrated 20inch Rigid Industries LED light bar in the center (light bar not included)
  • Overall design and fit is “High and Tight” to the contours of the vehicle.
  • Designed to work with the Open Fender System
  • Lower cutout to provide increased airflow.
  • Provides far greater tire clearance
The front end of a ford f250 super duty truck is shown on a white background.

FabFours Open Fender Front Bumper

  • Two front-side openings allow light options; (4) 3″ X 3″ Dually lights or (2) 6″ light bars (lights are not included)
  • 11gauge US Steel Construction
  • Sensor compatible
  • Retain OEM Receiver Hitch and Wiring Locations
  • Sensors optimized for vehicles with suspension lifts – stock height trucks may require tuning the sensor mount and will require special care.
The back end of a blue ford truck with a black bumper.

Fabfours Vengeance Rear Bumper

  • Accommodates factory 360° camera (2017-2023 models).Minor camera interference with Pre-runner Guard
  • Optional relocation bracket available for Adaptive Cruise Control. Relocation bracket is required for adaptive cruise control for 2017-2019 Super Duty (M3850-1). Chrome grilles will not work with relocation bracket. All 2020-2023 F250-F350 models require M6550-1 ACC Insert. M6550-1 will go in place of light bar.
  • Side mounting slots and tabs will hold up to (2) 3″ X 3″ cube lights per side (lights not included). Tested with Rigid Industries 3″x3″ D-series HD cubes
  • Works with high-performance towing capability. The F350 with the high-performance towing capability will require the F450-F550 front replacement
  • Allows for an integrated 20 inch Rigid Industries LED light bar in the center (light bar not included)
  • Overall design and fit is “High and Tight” to the contours of the vehicle.
  • Lower cutout to provide increased airflow.
  • Provides far greater tire clearance
The front of a black ford truck with a bumper and tires on a white background.

FabFours Vengeance Front Bumper

Share by: